Molly60 Keyboard

Limit:
Every Vendor only have 200 sets Molly60

 

Giveaway

Join our NLandkeys Discord and we will be running a weekly  Molly60 giveaway during GB and if a purchase has been made and won, the order will be refunded in full!
 

Reminder:
If you choose"Spraying Aluminum" in "Weight Material", then please choose your color as you like
If you choose "Brass PVD" or "SS PVD", please select "None", otherwise it will still make PVD Weight
Delivery from China
 

Spec

• Material: Aluminum
• Mounting Style: Gasket
• Degree：7.5°
• Plate: FR4/PC/Aluminum
• PCB:
  • Hot-swap
  • Non-flex-cut
  • 1.6mm Thickness
  • Via Support
• Connectivity: USB-C
• Layout: HHKB/WK
• Weight: 1.2kg

• Spraying Aluminum
• PVD Brass （Additional 25USD ）
• PVD SS （Additional 25USD ）

• 1x Aluminum top and bottom case 
• 1x Hotswap PCB 
• 1x Weight
• 1 Sets 3mm Gasket Poron Foam
• 1 Sets 3mm Gasket Rubber Foam
• Switch From
• Plate From
• Bottom From
• 1x Plate
• Screws and Keyboard Feet

• GB Starts:7/5
• GB Ends:7/25
• EST: 3 Months After GB(High probability of advancement, only 2 months at the earliest)

NLandKeys will try their best to produce cases that look just as nice as keyboards that cost 5x as much. From a typical viewing distance during normal use the keyboard should be free of significant bumps, scratches and chips. This does not include slight imperfections that are only viewable in certain angles and lighting conditions. 

Any imperfection (scratch, gloss, discoloration, mark, bump, differences in texture) under 1.5mm on the exterior of the case will not be considered for replacement.

The top and bottom cases are separate halves and are machined separately. Due to difference in tolerance there may be slight horizontal displacement / difference in form of one half relative to the other. The spray coating adds thickness, so depending on the spread the apparent seam between the two cases may vary very slightly in certain parts.

NLandKeys will try their best to make the interior of the cases as nice as the exterior, but in some cases there may exist various marks inside the keyboard case, which would not be visible once fully assembled. This may include, but not limited to uneven spraying, accumulation of powder, scratches and marks left from the hanging points.

PVD finishes on Stainless Steel and Brass weights cover a large area, which is prone to slight imperfections. There may be fine particles embedded on the surface. There may be distortions of reflection on certain parts. 

All hot-swap sockets, no matter the PCB or manufacturer, are prone to breaking off when switches are installed without bracing the hot-swap sockets from the back. NLandKeys will not replace PCBs that are damaged due to user error. Please inspect your PCB as soon as you receive your keyboard kit for any damage caused during transit or production. If you find anything wrong please contact your vendor within 24 hours.

The renders provided on this page are for reference only. A photograph of all color sample swatches have been provided on this page. NLandKeys will try their best to match the final product match as close to the render as possible, but due to the nature of production the colors may vary slightly.